Indoor Air Quality

Indoor Air Quality (IAQ) or Indoor Air Pollution refers to the Air Quality within and around buildings and premises used for residential, commercial or factory premises and its surroundings – especially as it relates to the health and comfort of its occupants. IAQ can be affected by gases (including carbon monoxide, carbon dioxide, radon, volatile organic compounds that include but are not limited from sources such as smoke, toxic gases, kerosene fumes, unvented and malfunctioning furnaces & stoves, building materials such as paint, furnishings, pollen, varnish etc. personal care products), particulates, microbial contaminants (mold formed due to humidity, bacteria), or any mass or energy stressor that can induce adverse health conditions. Ventilation, filtration and control of source are the primary ways to dilute contaminants for improvement of Indoor Air Quality in most occupied premises. Residential units can further improve indoor air quality by routine cleaning of carpets and area rugs. Cleaning based on traffic, number of household members, pets, children and smokers usually help create a framework guidance for IAQ improvement. Carpets and rugs act like an air filter and must be cleaned.

Determination of IAQ involves the collection of air samples, monitoring human exposure to pollutants, collection of samples on building surfaces, and computer modelling of air flow inside buildings.

IAQ is part of Indoor Environmental Quality (IEQ), which includes IAQ as well as other psychological and physical aspects of life indoors (e.g., lighting, visual quality, acoustics, and thermal comfort)

Indoor air pollution in developing nations is the most deadly risk globally. A major source of indoor air pollution in developing countries is the burning of wood, charcoal, dung, or crop residue for heating and cooking. Estimates indicate approximately 2.2 – 2.5 million deaths occurring annually as a resultant to such high levels of exposure to particulate matter. The majority of deaths occur in the developing nations.

A way of quantitatively ensuring the IAQ is by the frequency of effective turnover of inside air by replacing it with outside air. In the UK, for example, classrooms are required to have 2.5 outdoor air changes per hour. In gymnasiums, physiotherapy spaces and restaurants & dining areas, the ventilation should be sufficient to limit carbon dioxide to 1,500 ppm. In the US, and according to ASHRAE Standards, ventilation in classrooms is based on the amount of outdoor air per occupant plus the amount of outdoor air per unit of floor area, not air changes per hour. Since carbon dioxide indoors comes from occupants and outdoor air, the adequacy of ventilation per occupant is indicated by the concentration indoors minus the concentration outdoors. The value of 615 ppm above the outdoor concentration indicates approximately 15 cubic feet per minute of outdoor air per adult occupant doing sedentary office work where outdoor air contains 385 ppm, the current global average atmospheric CO2 concentration.

In classrooms, the requirements in the ASHRAE standard 62.1, Ventilation for Acceptable IAQ, would typically result in about 3 air changes per hour, depending on the occupant density. Here as we now know the occupants aren’t the only source of pollutants, so outdoor air ventilation may need to be higher when unusual or strong sources of pollution exist indoors.

When outdoor air is polluted, then bringing in more outdoor air can actually worsen the overall quality of the indoor air and exacerbate some occupant symptoms related to outdoor air pollution. Generally, outdoor country air is better than indoor city air. Exhaust gas leakages can occur from furnace metal exhaust pipes that lead to the chimney – when there are leaks in the pipe and the pipe gas flow area diameter has been reduced.

Moisture management and humidity control requires operating HVAC systems as designed. Moisture management and humidity control may conflict with efforts to try to optimise the operation to conserve energy. For example, Moisture management and humidity control requires systems to be set to supply Make Up Air at lower temperatures (design levels), instead of the higher temperatures sometimes used to conserve energy in cooling-dominated climate conditions. However, for most of the places where during the majority of hours of the year, outdoor air temperatures are cool enough that the air does not need further cooling to provide thermal comfort indoors. However, high humidity outdoors create the need for careful attention to humidity levels indoors. High humidities give rise to mold growth and moisture indoors is associated with a higher prevalence of occupant respiratory problems.

The ‘dew point temperature’ is an absolute measure of the moisture in air. Some facilities are being designed with the design dew points in the lower 10’s °C, and some in the upper and lower 4,5’s °C. Some facilities are being designed using desiccant wheels with gas fired heater to dry out the wheel enough to get the required dew points. On those systems, after the moisture is removed from the make up air, a cooling coil is used to lower the temperature to the desired level.

Commercial buildings, and sometimes residential, are often kept under slightly positive air pressure relative to the outdoors to reduce infiltration. Limiting infiltration helps with moisture management and humidity control.

Dilution of indoor pollutants with outdoor air is effective to the extent that outdoor air is free of harmful pollutants. Ozone in outdoor air occurs indoors at reduced concentrations because ozone is highly reactive with many chemicals found indoors. The products of the reactions between ozone and many common indoor pollutants include organic compounds that may be more odorous, irritating, or toxic than those from which they are formed. Recent research has shown that mortality and morbidity increase in the general population during periods of higher outdoor ozone and that the threshold for this effect is around 20 parts per billion (ppb).

Institutional program

A variety of scientists work in the field of indoor air quality including chemists, physicists, mechanical engineers, biologists, bacteriologists and computer scientists. Some of these professionals are certified by organisations such as the American Industrial Hygiene Association, the American Indoor Air Quality Council and the Indoor Environmental Air Quality Council.

On the international level, the International Society of Indoor Air Quality and Climate (ISIAQ), formed in 1991, organises two major conferences, the Indoor Air and the Healthy Buildings series. ISIAQ’s journal Indoor Air is published 6 times a year and contains peer-reviewed scientific papers with an emphasis on interdisciplinary studies including exposure measurements, modeling, & health outcomes.

In our country, the IAQ awareness is not as high as is in the developed world nevertheless it is not very less as agencies like ISHRAE, ASHRAE, certain NGOs. We are also aware that IAQ is also related to cleanliness with the advent of our Prime Minister’s Clean India Campaign (Swachh Bharat Abhiyan) I am sure the awareness for cleanliness and in turn IAQ will be more high and widespread.